Welcome to MakerHome




We've completed our yearlong print-a-day project!
All new material is now at Hacktastic: www.mathgrrl.com


Wednesday, September 18, 2013

Day 23 - Menger coasters

It's hard to 3D-print a Level 3 Menger sponge.  But it isn't hard to print a slice of one, and it makes for a decent coaster.


STL file: http://www.geekhaus.com/makerhome/day23_mengercoaster.stl
Tinkercad link: https://tinkercad.com/things/kETD0Hz44gY-day-23-menger-coaster
Thingiverse link: http://www.thingiverse.com/thing:153046

Settings:  Afinia MakerWare at .3mm resolution, fast setting, with a raft, in about 34 minutes.

Technical notes:  With the Afinia and settings as above, this model prints a raft in layers 1-7, the green base in layers 8-10, and the white Menger slice in rows 11-13.  You can pause the Afinia 3D software and switch the filament color at the start of row 11.  In the picture only the closest coaster was printed that way; the other two coasters were thinner with less rows in both the Menger and base layers.  It looks a lot better with more layers.

Stuff you might want to change: You can print these without the colored backgrounds, if you don't really care much about your table and just want coasters for fun.

No comments:

Post a Comment