*T(2,3)*and

*T(3,2)*torus knot conformations:

STL file for T(2,3): http://www.geekhaus.com/makerhome/day150_trefoil_torus23_40_25_3.stl

STL file for T(3,2): http://www.geekhaus.com/makerhome/day150_trefoil_torus32_40_25_3.stl

Thingiverse link: http://www.thingiverse.com/thing:234107

Settings: MakerWare .3mm/low in 20-25 minutes per knot, with the custom slicing profile from Day 110.

Technical notes, math flavor: Torus knots are knots that can be wrapped around a torus (inner-tube or donut shape) without any self-intersections. The torus knot

*T(p,q)*wraps p times around the torus like a clock at the same time that it wraps q times around the handle of the torus. The knot

*T(p,q)*is always equivalent to the knot

*T(q,p)*, even though the two conformations can at first glance appear to be quite different. In the picture below from Paul Aspinwall at Duke University, the torus knot

*T(3,5)=T(5,3)*wraps 3 times around the outside and 5 times around the handle.

The parametric equations for a torus with handle radius

*a*and large radius

*c*are (see Wolfram):

If we substitutex = (c + a cos v) cos u

y = (c + a cos v) sin u

z = a sin v

*u=pt*and

*v=qt*then as

*t*runs from 0 to 2휋 we obtain a curve that traces the

*T(p,q)*torus knot around the surface of the torus (and if

*p*and

*q*are reversed then we get the

*T(q,p)*torus knot).

Technical notes, OpenSCAD flavor: The knots are made using parametric equations that trace out a curve along the surface of a torus. The code below samples points along this curve, puts spheres at those points, and then connects adjacent points with a hull. You can control the thickness of the curve by changing the radius of the spheres. Much thanks to kitwallace who had the idea to model curves this way in OpenSCAD. Making knot models that can export to STL files is easy to do in Mathematica (see Day 110), but Mathematica is not a free tool and not everyone has access to it. In addition, Mathematica does not always export reliable STL files. OpenSCAD is free and makes fairly stable STL files; the only penalty is that it is SLOW. Here is the commented OpenSCAD code that produced the two models in this post:

// mathgrrl parametric knots - torus trefoils

// tubify module based on tube module from kitwallace

// http://www.thingiverse.com/thing:230557/// remove comments for the one you want to compile

/*

// trefoil as the torus knot T(2,3)

// http://mathworld.wolfram.com/Torus.html

// take parameterization of torus (u,v)->R^3

// and let u=2t, v=3t

// scaled to 40mm before tubifying

function f(t) =

[ 3.9*(3+1.6*cos(2*t))*cos(3*t),

3.9*(3+1.6*cos(2*t))*sin(3*t),

3.9*(1.6*sin(2*t))

];

// create the knot with given radius and step

tubify(2.5, 12, 360);

*/

/*

// trefoil as the torus knot T(3,2)

// http://mathworld.wolfram.com/Torus.html

// take parameterization of torus (u,v)->R^3

// and let u=2t, v=3t

// scaled to 40mm before tubifying

function f(t) =

[ 3.9*(3+1.6*cos(3*t))*cos(2*t),

3.9*(3+1.6*cos(3*t))*sin(2*t),

3.9*(1.6*sin(3*t))

];

// create the knot with given radius and step

tubify(2.5, 3, 360);

*/

module tubify(r, step, end) {

for (t=[0: step: end+step]) {

hull() {

translate(f(t)) sphere(r);

translate(f(t+step)) sphere(r);

}

}

};